Skip to content
Home

APEX

APEX(Audio Products of Excellence)사는 품질을 우선으로하는 이름 그 자체에 의미를 담고 있습니다. APEX사는 1990년 이후 프로오디오 시장을 시작으로 PE-133 싱글 디바이스에 그래픽EQ와 멀티 파라미터/놋치 필터를 내장한 제품을 시작, 파라그래픽EQ 역시 시장에 첫선을 보였습니다. APEX의 목표는 항상 음향의 고품질을 위한 혁신적인 디자인의 아날로그 및 디지털 제품개발에 있습니다. 풍부한 경험자와 젊은 엔지니어로 구성된 팀웍을 바탕으로 현 프로오디오 시장에서 오늘도 새로운 제품개발을 위해 노력하고 있습니다.

Intelli-Z²

For many audio systems installed in fixed installations (such as theatres, conference centres etc.) it is common to find system processors hidden away and very often left untouched in remote amp- or control-rooms. Utilising the full power of the Apex Intelli-Ware remote control software application with integral analyser-bridge, the new Intelli-Z2 system management processor is designed specifically with such installations in mind. With its 4 in/8 out configuration, integral mixer and selectable analogue/AES-3 I/O (but without the additional costs of unnecessary hardware controls) the Intelli-Z2 is a powerful, yet cost-effective system management solution specifically for use in fixed installations.

Based on the recognised and respected Intelli-X2 series platform, the new Intelli-Z2 provides the same level of power, control and performance, but in an installation-friendly package.

Click and download Intelli-Ware free of charge.

Right-click in the device pane to select a virtual device. With the virtual device selected, you can discover the intuitive nature of Intelli-Ware.

Balanced line level inputs
Connectors: 3-pin XLR (software switch-able between analog and AES-3)
Type: electronically balanced
Impedance: >10k ohms, balanced
Common mode rejection: >90dB
Max input level: 18, 21, 24 or 27 dBu software selectable, balanced, 1% THD+N
Frequency response: 20 Hz - 20 kHz, ±0.5 dB
THD+N: less than 0,005%, +4 dBu, 20Hz- 20 kHz, 22 kHz BW
Dynamic range: 120 dB, 20 Hz to 20kHz, un-weighted at +21dBu headroom settings
Crosstalk: >90 dB
AD conversion: 24-bit, sigma-delta
Balanced line level outputs
Connector: 3-pin XLR (software switch-able between analog and AES-3)
Type: electronically balanced
Impedance: <50 ohms, balanced
Max output level: 15, 18, 21, 24 dBu software selectable, into 600 ohms, balanced, 1%
THD+N
Frequency response: 20 Hz - 20 kHz, ±0.5 dB
THD+N: less than 0,005%, +4 dBu, 20Hz- 20 kHz, 22 kHz BW
Dynamic range: 120 dB, 20 Hz to 20kHz, un-weighted at +21dBu headroom settings
Crosstalk: >90 dB
DA conversion resolution: 24-bit
AES-3 inputs
Connector: 3-pin XLR (software switch-able between analog and AES-3)
Type: transformer isolated
Impedance: 110 ohms or 75 ohms selectable (internal jumper), balanced
Supported formats: AES-3 and SPDIF up to 24-bit
Supported sample rates: 32 to 192 kHz
AES-3 outputs
Connector: 3-pin XLR (software switch-able between analog and AES-3)
Type: transformer isolated
Impedance: 110 ohms or 75 ohms selectable (internal jumper), balanced
Word-clock input
Connector: BNC
Termination: 75 ohms switch-able
Input level: 1 to 10 Vpp
Word clock output
Connector: BNC
Impedance: 75 ohms
Output level: TTL 5 Vpp
Digital processing
Sample rate: 44,1kHz, 48kHz, 88,2kHz, 96kHz, 176,4kHz or 192kHz selectable
Internal processing: 32-bit floating point
Input / output channel:
Intelli-Z²: 4 in x 8 out
Network remote control
Built-in Ethernet switch: IEEE 802.3 10Base-T/100Base-TX
Connectors: 3 x Neutrik EtherCon, Auto MDI-MDIX
Protocol: Proprietary UDP/IP based, SNMP
RS-232
Connector: D-sub 9-pin female
Mains
Connector: Neutrik PowerCon
Voltage: Auto-detect 100-240 Vac (+/- 10 %) - 50-60 Hz
Power consumption: Intelli-Z² < 60 VA
Input channels functions
Gain: -80 to +15dB, 0,1dB steps
Polarity: normal / inverted
Delay:
Duration: 0 to 1500ms, sample rate depend steps,
Distance: 0 to 500m
Temperature: -20 to 50°C, 0,1° steps
Relative humidity: 0 to 100%, 1% steps
GEQ: 30-band ISO centred, +/-15 dB, proportional-Q or constant-Q mode
selectable
PEQ:
Bands 12
Filter types: Bell-Symmetrical, Bell-Asymmetrical, Notch, Low-Shelving 6dB/oct, Low-
Shelving 12dB/oct, High-Shelving 6dB/oct , High-Shelving 12dB/oct, All-
Pass 90°, All-Pass 180°, High-Pass 6dB/oct, High-Pass 12dB/oct, High-Pass
Vari-Q 12dB/oct, Low-Pass 6dB/oct, Low-Pass 12dB/oct, Low-Pass Vari-Q
12dB/oct, Band-Pass
Frequency: 10Hz to 22kHz, 0,1Hz steps
Gain: -40 to +15dB, 0,1dB steps (when applicable)
Q: 0,1 to 48, 0,01dB steps (when applicable)
Compressor:
Threshold: -80 to 0dBfs, 0,1dB steps
Ratio: 1:1 to 50:1, 1 steps
Knee: hard or soft
Attack time: 0,5 to 100ms, 0,1ms steps
Release time: 5 to 5000ms, 0,1ms steps
Side-chain mode: flat, high-pass or band-pass mode
Make-up gain: -20 to +20dB, 0,1 steps
Mix matrix functions
Gain: -80 to +15dB, 0,1dB steps
Routing: enabled/disabled
Output channel functions
Delay:
Duration: 0 to 1500ms, sample rate depend steps,
Distance: 0 to 500m
Temperature: -20 to 50°C, 0,1° steps
Relative humidity: 0 to 100%, 1% steps
Driver alignment:
Duration: 0 to 30ms, sample rate depend steps,
Distance: 0 to 10000cm, 0,1cm steps
Temperature: -20 to 50°C, 0,1° steps
Relative humidity: 0 to 100%, 1% steps
PEQ:
Bands 12
Filter types: Bell-Symmetrical, Bell-Asymmetrical, Notch, Low-Shelving 6dB/oct, Low-
Shelving 12dB/oct, High-Shelving 6dB/oct , High-Shelving 12dB/oct, All-
Pass 90°, All-Pass 180°, High-Pass 6dB/oct, High-Pass 12dB/oct, High-Pass
Vari-Q 12dB/oct, Low-Pass 6dB/oct, Low-Pass 12dB/oct, Low-Pass Vari-Q
12dB/oct, Band-Pass
Frequency: 10Hz to 22kHz, 0,1Hz steps
Gain: -40 to +15dB, 0,1dB steps (when applicable)
Q: 0,1 to 48, 0,01dB steps (when applicable)
High-pass and low-pass crossover:
Filter types: Butterworth 6 to 48dB/octave, 6dB steps
Linkwitz-Riley 12 to 48dB/octave, 12dB steps
Bessel 12 to 48dB/octave, 6dB steps
Frequency: 10Hz to 20kHz, 0,1Hz steps
FIR filters:
At 48 kHz: 5 x 1024 taps or 8 x 512 taps
At 96 kHz: 3 x 1024 taps or 8 x 512 taps
Gain: -80 to +15 dB, 0,1 dB steps
Polarity: normal / inverted
Limiter:
Type: Dual-stage, RMS + Peak limiter
RMS threshold: -80 to 0 dBfs (or dBu equivalent), 0,1 dB steps
Peak threshold: -80 to 0 dBfs (or dBu equivalent), 0,1 dB steps
RMS attack: 0,5 to 100 ms, 0,1 ms steps
Peak attack: 0ms
Release: 5 to 10000 ms, 0,1 ms steps
Environment
Operating
Temperature: 0° to 50° C
Relative humidity: 10 to 60 %, non-condensing
Storage
Temperature: -20° to 70° C
Mechanical specifications
Dimensions
Unit
Width: 483 mm (19-inch)
Height: 43,6 mm (1,75-inch - 1U)
Depth: 286 mm
Package
Width: 575 mm
Height: 110 mm
Depth: 355 mm
Weight
Unit (Nett):
Intelli-Z² 3,75 kg
Package (Shipping):
Intelli-Z² 5,5 kg

  • 등록된 다운로드가 없습니다.