Skip to content
Home

APEX

APEX(Audio Products of Excellence)사는 품질을 우선으로하는 이름 그 자체에 의미를 담고 있습니다. APEX사는 1990년 이후 프로오디오 시장을 시작으로 PE-133 싱글 디바이스에 그래픽EQ와 멀티 파라미터/놋치 필터를 내장한 제품을 시작, 파라그래픽EQ 역시 시장에 첫선을 보였습니다. APEX의 목표는 항상 음향의 고품질을 위한 혁신적인 디자인의 아날로그 및 디지털 제품개발에 있습니다. 풍부한 경험자와 젊은 엔지니어로 구성된 팀웍을 바탕으로 현 프로오디오 시장에서 오늘도 새로운 제품개발을 위해 노력하고 있습니다.

Intelli-X 2 48

Featuring internal processing up to 192 kHz as standard, high-end studio-grade analogue circuit designs and mastering-grade compressors, the new Intelliseries sets the new benchmark in system management and speaker processing design. Whether the application is for a standalone system controller or crossover, configured using front panel controls, or a comprehensive wireless networked system for Stadium or Arena sized tours, the Intelli-X² is designed to provide the solution that our clients demand. With a comprehensive preset library provided as standard, implementing the Intelli-series into your system couldn't be easier.

Designed to be Plug-and-Play, the Intelli-X² is simple to configure and integrate into any network. Whether the application is for a standalone system controller or crossover, configured using front panel controls, or a comprehensive wireless networked system for Stadium or Arena sized tours, the Intelli-X² is designed to provide the solution that our clients demand.

With a comprehensive preset library provided as standard, implementing the Intelli-series into your system couldn't be easier. Reliability hasn't taken a back seat either. Comprehensive test procedures including vibration and thermal tests, extended soak testing and the use of high reliability power supplies all ensure that the Intelli-X² is as reliable as possible against the rigors of life on the road.

The new Intelli-series consists of two system management devices, Intelli-X² 26 (2 in, 6 out) and Intelli-X² 48 (4in, 8 out), providing all the system management tools necessary for comprehensive system alignment and EQ, through to the provision of IIR and FIR based crossovers.

The new Intelli-series comprises a no-compromise design resulting in unmatched audio performance, even when using lower sample rates. The internal processing is selectable from 44.1 kHz to 192 kHz, providing full compatibility with both standard and high-end sample rate formats. Sample rate convertors are provided on the inputs as standard and may be switched in and out of circuit as required, enabling digital equipment operating at different rates to be connected.

A high degree of sonic quality in the analogue domain is also attained based on a no-compromise design philosophy. The new Intelli-series is equally at home in both live and studio applications. Intelli-X² I/O can be selected (in pairs) to be either analogue or AES3/EBU, enabling a mix of audio formats to be used simultaneously. Comprehensive front panel control means that reliance on computers to configure or tweak parameters is a thing of the past.

An exceptionally intuitive front panel, with integral LCD menu (using graphical icons similar to those used on many smartphones) makes operation of the Intelli-X² extremely quick to learn.

Critical attention has been focussed on synchronisation. Four sync options are available: Wordclock, AES A/B, AES C/D and internal. The Intelli-X² series manages synchronisation by providing a three-tiered redundancy approach, ensuring that if any sync source is lost, the Intelli-X² will automatically revert to another (as defined by the user) ensuring no loss in audio.

An integral date and time-based logging system is incorporated within all Intelli-devices. The log provides details of any key configuration/ control changes made and this log is available for viewing on the front panel display, or can be downloaded directly onto a computer.

The Intelli-series is designed to interface easily into any existing (or bespoke) Ethernet network via internal 3-way Ethernet switches. Both automatic IP (DHCP) and static IP configuration is provided as standard, enabling plug & play connectivity and more rigid IP assignments for use in fixed installations. SNMP support also provided. Wireless access points can be directly connected to Intelli-X² devices allowing direct control over a wireless network.

Click and download Intelli-Ware free of charge.

Right-click in the device pane to select a virtual device. With the virtual device selected, you can discover the intuitive nature of Intelli-Ware.

Balanced line level inputs
Connectors: 3-pin XLR (software switch-able between analog and AES-3)
Type: electronically balanced
Impedance: >10k ohms, balanced
Common mode rejection: >90dB
Max input level: 18, 21, 24 or 27 dBu software selectable, balanced, 1% THD+N
Frequency response: 20 Hz - 20 kHz, ±0.5 dB
THD+N: less than 0,005%, +4 dBu, 20Hz- 20 kHz, 22 kHz BW
Dynamic range: 120 dB, 20 Hz to 20kHz, un-weighted at +21dBu headroom settings
Crosstalk: >90 dB
AD conversion: 24-bit, sigma-delta
Balanced line level outputs
Connector: 3-pin XLR (software switch-able between analog and AES-3)
Type: electronically balanced
Impedance: <50 ohms, balanced
Max output level: 15, 18, 21, 24 dBu software selectable, into 600 ohms, balanced, 1%
THD+N
Frequency response: 20 Hz - 20 kHz, ±0.5 dB
THD+N: less than 0,005%, +4 dBu, 20Hz- 20 kHz, 22 kHz BW
Dynamic range: 120 dB, 20 Hz to 20kHz, un-weighted at +21dBu headroom settings
Crosstalk: >90 dB
DA conversion resolution: 24-bit
AES-3 inputs
Connector: 3-pin XLR (software switch-able between analog and AES-3)
Type: transformer isolated
Impedance: 110 ohms or 75 ohms selectable (internal jumper), balanced
Supported formats: AES-3 and SPDIF up to 24-bit
Supported sample rates: 32 to 192 kHz
AES-3 outputs
Connector: 3-pin XLR (software switch-able between analog and AES-3)
Type: transformer isolated
Impedance: 110 ohms or 75 ohms selectable (internal jumper), balanced
Word-clock input
Connector: BNC
Termination: 75 ohms switch-able
Input level: 1 to 10 Vpp
Word clock output
Connector: BNC
Impedance: 75 ohms
Output level: TTL 5 Vpp
Digital processing
Sample rate: 44,1kHz, 48kHz, 88,2kHz, 96kHz, 176,4kHz or 192kHz selectable
Internal processing: 32-bit floating point
Input / output channel: Intelli-X² 26: 2 in x 6 out
Intelli-X² 48: 4 in x 8 out
Network remote control
Built-in Ethernet switch: IEEE 802.3 10Base-T/100Base-TX
Connectors: 3 x Neutrik EtherCon, Auto MDI-MDIX
Protocol: Proprietary UDP/IP based, SNMP
RS-232
Connector: D-sub 9-pin female
Mains
Connector: Neutrik PowerCon
Voltage: Auto-detect 100-240 Vac (+/- 10 %) - 50-60 Hz
Power consumption: Intelli-X² 26 < 60 VA
Intelli-X² 48 < 60 VA
Input channels functions
Gain: -80 to +15dB, 0,1dB steps
Polarity: normal / inverted
Delay:
Duration: 0 to 1500ms, sample rate depend steps,
Distance: 0 to 500m
Temperature: -20 to 50°C, 0,1° steps
Relative humidity: 0 to 100%, 1% steps
GEQ: 30-band ISO centred, +/-15 dB, proportional-Q or constant-Q mode
selectable
PEQ:
Bands 12
Filter types: Bell-Symmetrical, Bell-Asymmetrical, Notch, Low-Shelving 6dB/oct, Low-
Shelving 12dB/oct, High-Shelving 6dB/oct , High-Shelving 12dB/oct, All-
Pass 90°, All-Pass 180°, High-Pass 6dB/oct, High-Pass 12dB/oct, High-Pass
Vari-Q 12dB/oct, Low-Pass 6dB/oct, Low-Pass 12dB/oct, Low-Pass Vari-Q
12dB/oct, Band-Pass
Frequency: 10Hz to 22kHz, 0,1Hz steps
Gain: -40 to +15dB, 0,1dB steps (when applicable)
Q: 0,1 to 48, 0,01dB steps (when applicable)
Compressor:
Threshold: -80 to 0dBfs, 0,1dB steps
Ratio: 1:1 to 50:1, 1 steps
Knee: hard or soft
Attack time: 0,5 to 100ms, 0,1ms steps
Release time: 5 to 5000ms, 0,1ms steps
Side-chain mode: flat, high-pass or band-pass mode
Make-up gain: -20 to +20dB, 0,1 steps
Mix matrix functions
Gain: -80 to +15dB, 0,1dB steps
Routing: enabled/disabled
Output channel functions
Delay:
Duration: 0 to 1500ms, sample rate depend steps,
Distance: 0 to 500m
Temperature: -20 to 50°C, 0,1° steps
Relative humidity: 0 to 100%, 1% steps
Driver alignment:
Duration: 0 to 30ms, sample rate depend steps,
Distance: 0 to 10000cm, 0,1cm steps
Temperature: -20 to 50°C, 0,1° steps
Relative humidity: 0 to 100%, 1% steps
PEQ:
Bands 12
Filter types: Bell-Symmetrical, Bell-Asymmetrical, Notch, Low-Shelving 6dB/oct, Low-
Shelving 12dB/oct, High-Shelving 6dB/oct , High-Shelving 12dB/oct, All-
Pass 90°, All-Pass 180°, High-Pass 6dB/oct, High-Pass 12dB/oct, High-Pass
Vari-Q 12dB/oct, Low-Pass 6dB/oct, Low-Pass 12dB/oct, Low-Pass Vari-Q
12dB/oct, Band-Pass
Frequency: 10Hz to 22kHz, 0,1Hz steps
Gain: -40 to +15dB, 0,1dB steps (when applicable)
Q: 0,1 to 48, 0,01dB steps (when applicable)
High-pass and low-pass crossover:
Filter types: Butterworth 6 to 48dB/octave, 6dB steps
Linkwitz-Riley 12 to 48dB/octave, 12dB steps
Bessel 12 to 48dB/octave, 6dB steps
Frequency: 10Hz to 20kHz, 0,1Hz steps
FIR filters:
At 48 kHz: 5 x 1024 taps or 8 x 512 taps
At 96 kHz: 3 x 1024 taps or 8 x 512 taps
Gain: -80 to +15 dB, 0,1 dB steps
Polarity: normal / inverted
Limiter:
Type: Dual-stage, RMS + Peak limiter
RMS threshold: -80 to 0 dBfs (or dBu equivalent), 0,1 dB steps
Peak threshold: -80 to 0 dBfs (or dBu equivalent), 0,1 dB steps
RMS attack: 0,5 to 100 ms, 0,1 ms steps
Peak attack: 0ms
Release: 5 to 10000 ms, 0,1 ms steps
Environment
Operating
Temperature: 0° to 50° C
Relative humidity: 10 to 60 %, non-condensing
Storage
Temperature: -20° to 70° C
Mechanical specifications
Dimensions
Unit
Width: 483 mm (19-inch)
Height: 43,6 mm (1,75-inch - 1U)
Depth: 286 mm
Package
Width: 575 mm
Height: 110 mm
Depth: 355 mm
Weight
Unit (Nett): Intelli-X² 26 3,75 kg
Intelli-X² 48 3,75 kg
Package (Shipping): Intelli-X² 26 5,5 kg
Intelli-X² 48 5,5 kg