Skip to content
Home

Tecpro

Tecpro는 '두개의 와이어' 혹은, 많은 사람들이 같은 통신에 참여할 수 있게 해주는 '파티라인', '링' 시스템이라고 알려져 있습니다. 모든 사용자는 전화기 시스템처럼 일제히 말할 수 있는 동시에 같은 서킷에서 다른 사용자들의 말을 들을 수 있는 전방향의 대화가 가능하도록 합니다. Tecpro 시스템의 주요 어플리케이션은 극장, 컨퍼런스, 라이브 공연 그리고 방송 시스팀에서 사용됩니다.

PS753

Tecpro Series 2 Power Supplies provide 24V DC to power small to medium sized intercom systems while terminating the audio lines with the correct impedance, enabling full duplex (simultaneous, two way) conversations to take place over extended cable runs. The 2A supply is capable of driving up to 45 BP511 beltpacks and is housed in a compact, robust, extruded aluminium case designed to withstand the rigours of the live events environment.

Fully compatible with older Tecpro designs.

Series 2 power supplies are protected against short circuit and over-temperature. Protection is electronic and automatic and no resetting is necessary following removal of a fault condition. This new generation of PSU can be operated world-wide without the need to change AC power supply settings.

Two versions are available. The PS751 offers single circuit operation only and is ideal for schools and small venues where simplicity of operation is essential. User stations are linked to the power supply via four parallel male XLR connectors on the rear panel. A green LED indicates 'Power ON'

The PS753 is similar but offers three independent intercom circuits which may be linked to create either one or two circuits. It is suitable for smaller theatres and rental companies who may need separate circuits to allow members of the sound crew, for example, to talk together without overhearing the lighting crew and vice versa. User stations are linked to the unit via three male XLR connectors (one per circuit). Two yellow LEDs indicate circuit linking.

All three circuits operate independently (unless linked), and draw their power from the 2A DC supply. A green LED indicates 'Power ON'

If there is a need for a director to talk to operators on more than one intercom circuit either separately or together, then a Tecpro Master Station should be considered.

Overview

  • Free-standing, compact
  • Tough, extruded aluminium case
  • Universal power supply 90-260 V AC, 50-60Hz
  • Power output 2A total
  • Short circuit and overload protection with indication
  • Automatic reset after short circuit
  • Supports up to 45 Tecpro BP511 beltpacks
  • 3-Pin XLR system connectors are compatible with standard mic cables
  • Three independent, linkable intercom circuits (PS753 only)with indication
  • 'Power ON' and 'Overload' indication
  • Suitable for use with Series 1 and Series 2 products

Technical Specs

Power requirements Universal power supply, 90 - 260 volts, 47 - 63Hz AC (cable supplied)
Power input connector: IEC
Power output 24V (current limited), 2 amps maximum
Output connectors 3-pin XLR male
Comms line 200 ohm audio, 5k ohm DC
Dimensions 215 x 110 x 47 mm
Weight 0.72Kg